pdc:recomputer
Jetson-10 Development Board
The reComputer Jetson-10 board comes pre-installed with Ubuntu 18.04 and can be connected to any USB mouse, keyboard, DP- or HDMI-equipped monitor and available Ethernet port. Typically, we commandeer peripherals from a computer in the Linux Lab but other options include VNC through a laptop, connecting to the projector in the lab, etc.
Setup and Modification Log
| O.S. Version | Hostname | IP Addr | Memory | Storage | Core Apps | Added Software |
|---|---|---|---|---|---|---|
| Ubuntu 18.04 | scarl-jetson | 10.97.126.228 | 4 GB | 16 GB eMMC | Jetson Stack, NVIDIA CUDA, cuDNN, and TensorRT software libraries | None (yet) |
More indepth system information can be found on the Jetson page.
RPi Table for Comparison
| Card Code | Hostname | Card Size | Linux Version | Extras | RPI Board | Version |
|---|
| Card 4.2 | pi | 32 GB | 4.4.11-v7+ #888 | Thonny, OpenMP | 4 | 64-bit |
| Card 4.3 | pi | 32 GB | 4.4.11-v7+ #888 | Thonny, OpenMP | 4 | 64-bit |
pdc/recomputer.txt · Last modified: 2022/07/15 17:10 by lix2
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
